Description
150 PSI High Speed 2 On 2’s JK (2007~2011) Two 400C’s On 2.0 Gal. Tank, w/Crossmember Bracket
Air and Pneumatic Delivery Systems 150PSI Dual Compressor OBA Kits parts by OBA
Using two high output compressors mounted to a 2.0 gallon, 5-port air tank all required components are included to allow the installation of a high speed onboard air system that provides 150 PSI maximum pressure. Available as a model-specific bolt-on application for 2007-2011 Jeep JK with a crossmember mounting bracket-2on2 systems all come complete with an easy-to-install wiring harness and manifold to make wiring and plumbing the system straightforward.
Note: 2on2 Bolt-On Platform systems in model specific
applications for 2007-2011 Jeep JK are equipped with
a crossmember mounting bracket.
| SPECIFICATIONS |
|---|
| – 12-Volt |
| – Permanent Magnetic Motor |
| – Duty Cycle: 33% @ 100 PSI |
| – Max. Working Pressure: 150 PSI |
| – Max. Amp Draw: 59 Amps |
| – Ingress Protection Rating: IP67 |
| – Dimensions: 18.5″L x 5.9″W x 13.5″H |
| – Net Weight: 30 lbs. |
| – |
| – |
| – |
| – |
| – |
| – |
| – |
| – |
| PRE-INSTALLED |
|---|
| – 2.0 Gallon 5-Port Air Tank |
| – (2) 400C Air Compressors w/Thermal Overload Protectors |
| – (2) 1/4″ Stainless Steel Braided Leader Hoses |
| – (2) 1/4″ JIC Fittings on Leader Hoses |
| – 1/4″ NPT Swivel to 1/4″ NPT Swivel |
| – T-Fitting (Remote Mount Filter) |
| – 1/4″ NPT Drain Cock |
– Sealed Pressure Switch with Delphi Connectors
(110 PSI On, 145 PSI Off) |
(2) Loomed Compressor Wires Terminated
with Delphi Connectors |
| – Inline Fuse Holder with Fuse |
| – 1/4″ NPT Safety Valve |
| – (4) 1/4″ NPT M Recessed Plugs |
| INCLUDED IN KIT |
|---|
| – Crossmember Mounting Bracket |
| – 60-amp Fuse & Fuse Holder |
| – 80-amp Relay |
| – (2) 1/4″ BSP Adapters for Air Lockers |
| – T-Fitting 1/4″ NPT F x 1/4″ NPT F x 1/4″ NPT M |
| – 1/8″ to 1/4″ NPT Reducer |
| – Wiring Harness with Delphi Connectors |
| – (2) Delphi Connector Plug Kits |
| – Billet 1/4″ NPT x 6-Port Manifold and Mounting Bracket |
| – Air Filter Housing with Installed Element |
| – (2) Replacement Air Filter Elements |
| – Dash Panel Air Pressure Gauge (0-160 PSI Illuminated) |
| – Air Pressure Regulator |
| – 15ft. DOT Air Line |
Please Note: 2on2 Bolt-On Platform systems in model specific applications for 2007-2011 Jeep JK are equipped with a crossmember mounting bracket.
PERFORMANCE DATA
| PSI | CFM | A | BAR | LPM | A |
|---|
| 0 | 4.55 | 39 | 0 | 129.0 | 39 |
| 10 | 4.18 | 40 | 1.0 | 115.6 | 41 |
| 20 | 3.96 | 42 | 2.0 | 106.5 | 45 |
| 30 | 3.74 | 45 | 3.0 | 96.6 | 47 |
| 40 | 3.50 | 46 | 4.0 | 86.4 | 50 |
| 50 | 3.25 | 48 | 5.0 | 78.4 | 53 |
| 60 | 3.00 | 50 | 6.0 | 70.8 | 58 |
| 70 | 2.83 | 52 | 7.0 | 64.0 | 57 |
| 80 | 2.60 | 55 | 8.0 | 57.5 | 54 |
| 90 | 2.46 | 59 | 9.0 | 50.6 | 52 |
| 100 | 2.28 | 57 | 10.0 | 43.7 | 50 |
| 110 | 2.12 | 55 | | | |
| 120 | 1.97 | 53 | | | |
| 130 | 1.80 | 52 | | | |
| 140 | 1.60 | 51 | | | |
| 150 | 1.48 | 49 | | | |
FILL RATES
| 2.0 GALLON TANK | FILL RATE |
|---|
| 0 to 145 PSI | 1 min. 00 sec. (± 05 sec.) |
| 110 to 145 PSI | 20 sec.(± 03 sec.) |
| 37″ X 12.5″ | FILL RATE |
|---|
| 0 to 30 PSI | 3 min. 25 sec. (± 10 sec.) |
| 15 to 30 PSI | 1 min. 40 sec. (± 05 sec.) |
| 40″ X 15.5″ | FILL RATE |
|---|
| 0 to 30 PSI | 3 min. 35 sec. (± 10 sec.) |
| 15 to 30 PSI | 1 min. 45 sec. (± 05 sec.) |
* Supply Voltage: 13.8 Volts
OE Reference: 30001
SKU: 530040001
150 PSI High Speed 2 On 2’s JK (2007~2011) Two 400C’s On 2.0 Gal. Tank, w/Crossmember Bracket
$1,018.69
Using two high output compressors mounted to a 2.0 gallon, 5-port air tank all required components are included to allow the installation of a high speed onboard air system that provides 150 PSI maximum pressure. Available as a model-specific bolt-on application for 2007-2011 Jeep JK with a crossmember mounting bracket-2on2 systems all come complete with an easy-to-install wiring harness and manifold to make wiring and plumbing the system straightforward.
OE Code : 30001
Application : Off Road and 4x4, RV and Motorhome
Fitment / Details : 12V Model, Capacity 2.0 Gallon, Inflates upto 40" Tyres, Max Working Pressure 150PSI, Suitable for Air Horns, Suitable for Air Locker, Suitable for Air Tools
Colour : Silver
Description
150 PSI High Speed 2 On 2’s JK (2007~2011) Two 400C’s On 2.0 Gal. Tank, w/Crossmember Bracket
Air and Pneumatic Delivery Systems 150PSI Dual Compressor OBA Kits parts by OBA
Using two high output compressors mounted to a 2.0 gallon, 5-port air tank all required components are included to allow the installation of a high speed onboard air system that provides 150 PSI maximum pressure. Available as a model-specific bolt-on application for 2007-2011 Jeep JK with a crossmember mounting bracket-2on2 systems all come complete with an easy-to-install wiring harness and manifold to make wiring and plumbing the system straightforward.
Note: 2on2 Bolt-On Platform systems in model specific
applications for 2007-2011 Jeep JK are equipped with
a crossmember mounting bracket.
(110 PSI On, 145 PSI Off)
with Delphi Connectors
Please Note: 2on2 Bolt-On Platform systems in model specific applications for 2007-2011 Jeep JK are equipped with a crossmember mounting bracket.
PERFORMANCE DATA
FILL RATES
* Supply Voltage: 13.8 Volts
OE Reference: 30001
SKU: 530040001
Additional information
30001
Off Road and 4×4, RV and Motorhome
12V Model, Capacity 2.0 Gallon, Inflates upto 40" Tyres, Max Working Pressure 150PSI, Suitable for Air Horns, Suitable for Air Locker, Suitable for Air Tools
Silver
Have you considered
150 PSI High Speed 2 On 2’s (Universal) Two 400C’s On 2.0 Gal. Tank, No Crossmember Bracket