Remote Inlet Air Filter Assembly, Gray Plastic Housing (1/4" x 3/8" Tube Fitting, NPT)

Remote Inlet Air Filter Assembly, Gray Plastic Housing (1/4" x 3/8" Tube Fitting, NPT)

£12.59
SKU 92622

Plastic remote inlet air filter housing with 1/4 inch M NPT connection. Comes with 1 filter element and an adaptor with 1/4 F NPT to a barbed fitting for 3/8" I.D. Tube

Remote Mount Inlet Air Filter Mounting Instruction

 

1. Place Remote Mounting Bracket onto Inlet Air Filter
assembly and line up attachment holes.

 

2. Fasten Bracket to Inlet Air Filter with 2 screws provided.

3. Screw 3/8"³ NPT (F) x 1/2"³ Tube Fitting onto Inlet Air Filter, hand tighten. (No thread tape needed)

4. Locate appropriate area where Remote Inlet Filter is to be
installed. Keep in mind that location should be dry and away
from heat source, and that the air inlet slots on the inlet air
filter are free from blockage and not facing upward.

5. Drill 3/8"³ mounting hole. Push Remote Filter Bracket pin
into hole.

6. Screw 3/8"³ NPT (M) x 1/2"³ Tube Fitting onto compressor's
air inlet port, tighten with wrench. (No thread tape needed)

7. Attach provided 1/2"³ air line to barbed tube fitting of air
inlet port of compressor.

8. Route air line to Remote Inlet Air Filter, measure and cut squarely
to appropriate length, and attach to Remote Inlet Air Filter.

 

 

CHOOSE YOUR REMOTE INLET AIR FILTER
92C Compressor N/A
100C Compressor P/N 92621
275C Compressor P/N 92621
280C Compressor N/A
325C Compressor P/N 92622
330C Compressor P/N 92622
350C Compressor P/N 92622
380C Compressor P/N 92622
400C Compressor P/N 92622
400H Compressor P/N 92622
420C Compressor P/N 92629
444C Compressor P/N 92622
450C Compressor P/N 92622
450H Compressor P/N 92622
460C Compressor P/N 92629
480C Compressor P/N 92629

 

Recently viewed