Description
Medium Duty Onboard Air System (12V, 150 PSI Compressor, 2.5 Gal. Tank)
Air and Pneumatic Delivery Systems Medium Duty OBA parts by OBA
VIAIR’s Medium Duty Onboard Air System is a pre-packaged compressed air solution that provides a 33% duty cycle 325C compressor, 2.5 gallon air tank, and all components needed to install basic vehicle-based pneumatics.
Please Note: Pressure Switch w/Relay (PNs 90110, 90111, 90113, 90118) is not a sealed unit and should be installed in an area protected from the elements to prevent damage and/or failure.
Use thread sealant for proper installation. Thread tape is not recommended. Properly sealed, recommended torque for 1/8″ is 10 ~ 11 ft. lbs. Recommended torque for 1/4″ and 3/8″ is 12 ~ 15 ft. lbs.
FEATURES |
– 2.5 Gallon VIAIR Air Tank |
– 325C VIAIR Compressor w/Thermal Overload Protector |
– Dash Panel Gauge with ON/OFF Switch |
– Pressure Switch with Relay (110 PSI on, 145 PSI off) |
– Reducer: 1/8″ (F) to 1/4″ (M) |
– 1/4″ Quick Connect Coupler (M) |
– 1/4″ 175 PSI Safety Valve |
– 1/4″ Drain Cock |
– 20ft. 12-Gauge Wire with Inline Fuse Holder |
– 4″ Strip of Continuous Grommet Material |
– Accessory Airline |
– Electrical Connections |
SPECIFICATIONS |
– 12-Volt |
– Permanent Magnetic Motor |
– Duty Cycle: 33% @ 100 PSI |
– Max. Working Pressure: 150 PSI |
– Max. Amp Draw: 21 Amps |
– Ingress Protection Rating: IP67 |
– |
– |
– |
– |
– |
– |
All Fittings are NPT rated unless otherwise noted.
Wiring harness NOT included.
PERFORMANCE DATA
PSI |
CFM |
A |
BAR |
LPM |
A |
0 |
1.59 |
14 |
0 |
45.0 |
14 |
10 |
1.40 |
16 |
1.0 |
37.6 |
16 |
20 |
1.24 |
16 |
2.0 |
34.1 |
18 |
30 |
1.20 |
18 |
3.0 |
32.3 |
18 |
40 |
1.17 |
18 |
4.0 |
29.1 |
20 |
50 |
1.08 |
19 |
5.0 |
26.0 |
21 |
60 |
1.01 |
20 |
6.0 |
23.7 |
21 |
70 |
0.93 |
21 |
7.0 |
21.5 |
21 |
80 |
0.87 |
21 |
8.0 |
19.7 |
21 |
90 |
0.82 |
21 |
9.0 |
18.0 |
21 |
100 |
0.77 |
21 |
10.0 |
16.5 |
21 |
110 |
0.72 |
21 |
|
|
|
120 |
0.68 |
21 |
|
|
|
130 |
0.64 |
21 |
|
|
|
140 |
0.60 |
21 |
|
|
|
150 |
0.57 |
21 |
|
|
|
* Supply Voltage: 13.8 Volts
FILL RATES
2.5 GALLON TANK |
FILL RATE |
0 to 145 PSI |
4 min. 15 sec. (± 10 sec.) |
110 to 145 PSI |
1 min. 25 sec. (± 05 sec.) |
31″ X 10.5″ |
FILL RATE |
0 to 30 PSI |
4 min. 40 sec. (± 10 sec.) |
15 to 30 PSI |
2 min. 30 sec. (± 05 sec.) |
33″ X 12.5″ |
FILL RATE |
0 to 30 PSI |
6 min. 40 sec. (± 15 sec.) |
15 to 30 PSI |
3 min. 20 sec. (± 10 sec.) |
OE Reference: 10003
SKU: 530010007
Medium Duty Onboard Air System (12V, 150 PSI Compressor, 2.5 Gal. Tank)
£384.45inc 20% VAT
Medium Duty Onboard Air System (12V, 150 PSI Compressor, 2.5 Gal. Tank)
OE Code : 10003
Application : Car and Truck, Off Road and 4x4
Fitment / Details : 12V Model, Capacity 2.0 Gallon, Inflates upto 33" Tyres, Max Working Pressure 150PSI, Suitable for Air Horns, Suitable For Air Lockers
Colour : Black, Silver
Description
Medium Duty Onboard Air System (12V, 150 PSI Compressor, 2.5 Gal. Tank)
Air and Pneumatic Delivery Systems Medium Duty OBA parts by OBA
VIAIR’s Medium Duty Onboard Air System is a pre-packaged compressed air solution that provides a 33% duty cycle 325C compressor, 2.5 gallon air tank, and all components needed to install basic vehicle-based pneumatics.
Please Note: Pressure Switch w/Relay (PNs 90110, 90111, 90113, 90118) is not a sealed unit and should be installed in an area protected from the elements to prevent damage and/or failure.
Use thread sealant for proper installation. Thread tape is not recommended. Properly sealed, recommended torque for 1/8″ is 10 ~ 11 ft. lbs. Recommended torque for 1/4″ and 3/8″ is 12 ~ 15 ft. lbs.
All Fittings are NPT rated unless otherwise noted.
Wiring harness NOT included.
PERFORMANCE DATA
* Supply Voltage: 13.8 Volts
FILL RATES
OE Reference: 10003
SKU: 530010007
Additional information
10003
Car and Truck, Off Road and 4×4
12V Model, Capacity 2.0 Gallon, Inflates upto 33" Tyres, Max Working Pressure 150PSI, Suitable for Air Horns, Suitable For Air Lockers
Black, Silver